Research, Development and Demonstration (RD&D) Approvals
Download a Research, Development and Demonstration (RD&D) Approval application form.
Works approval is required pursuant to section 19A of the Environment Protection Act 1970 for works at scheduled premises which will, or will be likely to, alter or increase the discharge of wastes or emission of noise to the environment. This also applies to the treatment and storage of prescribed wastes.
The works approval process was established to deal with commercial scale proposals where industrial process and discharge parameters are well known and where there is an ongoing discharge to the environment. Given the nature of research, development and demonstration projects, a different procedure is needed to cater for such projects that are typically limited in scale, duration and environmental impact.
This procedure is known as Research, Development and Demonstration (RD&D) Approval and is applicable to genuine RD&D projects.
Large projects that pose the same level of risk of environmental impact as established commercial scale industrial processes will have to undergo the usual works approval.
This page has information about these topics:
Benefits and outcomes
How to apply
Acceptance of applications
Submitting applications
Granting approval
Other approvals
Penalties and offences
Further information
Benefits and outcomes
- Industry benefits from a simple procedure for RD&D Approvals
- Approvals granted (or refused) within 30 days
- Less cost to industry
- Lower application fee
- Provides for legal certainty with the issuing of an RD&D Approval
- Encourages development of technologies
- Addresses environmental issues
- Directly contributes to improved environment protection and industrial development.
How to apply
If you are the occupier of scheduled premises, or would become scheduled with installation of this project, you may apply for RD&D Approval, provided the works are for genuine research, development or demonstration. Small scale research at recognised research institutions would not normally make the premises scheduled. Such situations should be discussed with EPA.
Application form number RD&D/94 Research Development and Demonstration Approval must be fully completed and signed by an authorised officer of the company.
Attach to the application form your supporting information, specifically addressing the following key points:
- Purpose
State the purpose and expected outcomes of the proposed project.
- Scale and dimension
The scale and dimension of the project will generally be small about existing operations and not a large development, particularly on a greenfield site. State the approximate volumes of product and waste to be handled and the approximate size of the project.
- Duration
The duration of RD&D projects would normally be in the order of a few months rather than years. State the duration of your project.
- Potential environmental impact
To enable EPA to ascertain the environmental effects, please state what the anticipated emissions will be and where they will be going (air, land, water or noise). Also detail any off-site waste disposal.
- Monitoring
Provide details of your proposed environmental monitoring program for the project.
- Contingency plans
Provide details of your contingency plans for routine operations and also for coping with any emergency situation to protect the environment.
- Certificate of Incorporation
Attach a copy of your certificate of incorporation.
- Fee
A fee of 60 fee units ($681.00) must accompany your application. Note that the current dollar value of a fee unit is $11.35.
Acceptance of applications
- Rejecting applications
Applications that do not include the above requirements cannot be considered by the Authority.
- Confidentiality
If you require any of the details in your application to the Authority to be confidential, you should clearly indicate your requirements in the submission.
Submitting applications
Completed applications should be mailed to EPA or to your local EPA regional manager.
Granting approval
The Authority will issue, or refuse to issue, an approval within 30 days of receiving an application containing the required information as listed above. The approval may contain specific conditions that must be adhered to by the applicant.
Other approvals
Important! It is your responsibility to obtain all other necessary permits and approvals as the RD&D Approval in no way overrides other statutory processes. For example, a planning permit may be required by the local council.
When a commercial operation is proposed following a RD&D project, a works approval pursuant to section 19A of the Act must be obtained.
Penalties and offences
You should note that section 19G(1) of the Environment Protection Act provides for penalties of up to $257,832 for contravention of conditions contained in RD&D Approvals.
Further information
Further information can be obtained from your EPA client manager, regional manager or the EPA Information Centre.