22 results

  1. IWRG424: Contaminated soil – organic compounds — Classification for reuse

    EPA Victoria has issued a classification for the management of contaminated soils, which contain the following types of organic compounds:· total petroleum hydrocarbons· monocyclic aromatic...

  2. IWRG431: Arsenic in mine tailings, sand and rock

    This publication provides information on the procedures and conditions required by EPA for the use of mine tailings, sand and rock which contains arsenic...

  3. IWRG831.3: Movement of controlled waste into Victoria

    This guideline provides advice to controlled waste producers, consignors, transporters and receivers on their obligations and the steps to follow for the movement of controlled waste into Victoria...

  4. IWRG423: Oil filters — Classification for reuse

    To achieve the best environmental outcome, used oil filters have been classified by EPA because there are recycling opportunities for the waste oil, metal filter casing, and cardboard filter materials...

  5. IWRG644.1: Used containers – transport and management

    These guidelines are for any business involved in the supply, use, reuse, reconditioning, recycling and disposal of containers that have been used for prescribed industrial wastes (PIWs). This...

  6. IWRG611.2: Asbestos transport and disposal

    Asbestos – particularly friable asbestos – poses health risks during removal, transport and disposal. It is important, therefore, that it be handled appropriately during these operations. Under the...

  7. IWRG622.1: Soil remediation technologies in Victoria

    This document provides a matrix of current soil remediation technologies available in Victoria. It is intended as a resource for site owners, developers, portfolio managers and consultants.In its...

  8. IWRG642: Motor vehicle repair and service premises

    This document provides owners, managers and employees in the motor vehicle repair industry with guidance for managing the different types of wastes generated on their premises in order to reduce the...

  9. IWRG300: Waste avoidance and reduction

    The easiest way for industry to reduce the costs associated with the management of their industrial waste is to avoid the generation of it altogether. The Environment Protection (Industrial Waste...

  10. IWRG600.2: Waste categorisation

    This document provides an overview of waste types and hazard categorisation for both solid industrial waste and soils.This replaces publication IWRG600.1, released September 2010...

Previous Page (disabled)
  1. Page 1
  2. Page 2
  3. Page 3