Permit
Permission summary
- Statutory document ID:
- P000252009
- Issue date:
- Thu 3 Jun 2021
- Expiry date:
- Thu 3 Jun 2027
- Status:
- Active
- Activity site:
- Not applicable
Permission holder
Name | Address |
|---|---|
Name PETER FOOTT WASTE COLLECTION PTY LTD | Address 27 - 29 WELSFORD ST, SHEPPARTON VIC 3630, AU |
Activity
View a list of all activities EPA regulates.
Transaction | Status |
|---|---|
Transaction A10a (Reportable priority waste transport - hazardous) | Status Issued |
More permission details
Learn more about permission conditions.
CodeDescriptionCodePER_G01.01DescriptionA copy of this permit must be kept in the vehicle to which the permit applies and be easily accessible to persons who are engaging in the permit activity.CodePER_G02DescriptionYou must immediately notify the Authority by calling 1300 EPA VIC (1300 372 842) in the event of: a) A discharge, emission or deposit which gives rise to, or may give rise to, actual or potential harm to human health or the environment; or b) Any breach of the permit.CodePER_G03DescriptionYou must notify the Authority within 48 hours of the occurrence of any the following: (a) Any change to your name or address (including your registered address and site as applicable); or (b) A change to an officer (as defined in the Act). You must update the EPA Interaction Portal if any other relevant administrative details for your business change.CodePER_WT01DescriptionNo reportable priority wastes other than those listed in Appendix 2 may be transported by the vehicle listed in Appendix 1.CodePER_WT02DescriptionThe holder of this permit must ensure that reportable priority waste (transport) is stored in a way which minimises the risk of waste escaping, spilling or leaking at any time during transport.CodePER_WT03DescriptionThe holder of this permit must ensure that reportable priority waste (transport) of different types is not transported together unless the wastes are of a type or types that are compatible with each other.CodePER_WT04DescriptionThe holder of this permit must ensure that containers used to contain reportable priority waste (transport) during transport are compatible with the reportable priority waste (transport).CodePER_WT05DescriptionThe holder of this permit must ensure that when a vehicle to which the permit applies is used to transport reportable priority waste, the driver has completed all EPA approved training requirements and all training certifications are current and valid.CodePER_WT06DescriptionThe holder of this permit must ensure that when a vehicle to which the permit applies is used to transport waste classified as a class of dangerous goods as per Appendix A of the Waste Classification Assessment protocol (EPA Publication 1827.1, released June 2020), the driver has completed all EPA approved training requirements and all training certifications are current and valid.CodePER_WT07DescriptionSubject to condition PER_WT08, a vehicle transporting the following industrial wastes in a tipper, tanker or container with a capacity of more than 500 kilograms or litres must display the 30XY Emergency Information Panel depicted in Figure 1— a) D300 b) J100 c) J120 d) J130 e) J170 f) K100 g) K110 h) L100 i) L200-H j) T130-HCodePER_WT08DescriptionWhere Emergency Information Panels must be fixed to a vehicle, if the mounting of full size panels is not possible due to vehicle design or construction, halfsize panels are permitted to be fixed. Half-size panels must replicate the information and proportions and measure not less than half the dimensions of the full-size Emergency Information Panel otherwise required.CodePER_WT09DescriptionA vehicle transporting clinical and pharmaceutical wastes must have the class label depicted in Figure 2 in black on a white background fixed on the front and rear of the vehicle.CodePER_WT10DescriptionWhen clinical and pharmaceutical wastes are being transported, the waste(s) must be: a) packaged in a manner which minimises the risk to handlers and the community; and b) clearly labelled to identify the type of waste or wastes being transported.CodePER_WT11DescriptionAll clinical and pharmaceutical wastes must be transported in a sealed load compartment that is lockable or in a lockable secondary container.CodePER_WT12DescriptionYou must ensure that, where you have made a declaration to the Authority that the vehicle to which the permit applies is fit for the purpose of transporting the reportable priority waste (transport), the vehicle and associated insurance and approvals are maintained in accordance with that declaration whenever the vehicle is transporting reportable priority waste (transport).CodePER_WT13DescriptionThe holder of this permit may unload the reportable priority waste (transport) onto another means of transport that will convey the waste interstate or overseas, provided that the Authority has approved the interstate or overseas destination.CodePER_WT14DescriptionThe holder of this permit must ensure there is an impact buffer distance between the rear of vehicle and liquid waste containers to prevent any spills if the rear of the vehicle is impacted.CodePER_WT15DescriptionThe load compartment must be separated from the driver’s cabin by a solid partition. Note: This condition does not apply to vehicles classified as prime movers.CodePER_WT16DescriptionA spill kit that is appropriate for the type and volume of waste being transported must be: a) carried in the vehicle; and b) accessible at all times. Note: This condition does not apply to vehicles classified as prime movers.CodePER_WT17DescriptionAll (solid) bulk loads must be fully contained and/or covered by a suitable tarpaulin cover that prevents reportable priority waste (transport), including dust, from leaving the vehicle. Note: This condition does not apply to vehicles classified as prime movers.CodePER_WT18DescriptionThe holder of this permit must ensure that the waste load compartment which is to be used for transporting packaged liquid waste is designed and maintained to ensure that it contains all spills effectively. Note: This condition does not apply to vehicles classified as a tanker, prime mover, tipper, trailer without secondary containment, hooklift (bin/skip only), truck without secondary containment, utility without secondary containment and van without secondary containment.CodePER_WT19DescriptionWhen asbestos waste is being transported, all asbestos waste must be appropriately packaged in a manner which prevents the release of airborne asbestos fibres. All asbestos waste must be securely loaded and stowed on the vehicle during transit in such a way that does not cause any of the packaging to rupture. Note: This condition does not apply to vehicles classified as prime movers or tankers.Learn more about waste acceptance regulations.
CodeDescriptionCodeA100DescriptionCyanide-containing waste resulting from surface treatment of metals and plasticsCodeA110DescriptionWaste from heat treatment and tempering operations containing cyanidesCodeA130DescriptionCyanides (inorganic)CodeB100DescriptionAcids in a solid form or acidic solutions with pH value 4 or lessCodeC100DescriptionAlkaline solids or alkaline solutions with pH value of 10 or more, including caustic soda, alkaline cleaners and waste limeCodeD140DescriptionChromium compounds including hexavalent and trivalentCodeD300DescriptionNon-toxic salts including sodium chloride, calcium chlorideCodeD390DescriptionInorganic chemicals not otherwise specified in items 6 to 29 or 31 of "Schedule 5—Waste Classification" of the Environment Protection Regulations 2021CodeF100DescriptionAqueous-based wastes from the production, formulation and use of paints, lacquers, varnish, inks, dyes and pigmentsCodeF110DescriptionAqueous-based wastes from the production, formulation and use of resins, latex, plasticisers, glues and adhesivesCodeF120DescriptionSolvent-based wastes from the production, formulation and use of paints, lacquers, varnish, inks, dyes and pigmentsCodeF130DescriptionSolvent-based wastes from the production, formulation and use of resins, latex, plasticisers, glues and adhesivesCodeH100DescriptionWaste from the production, formulation and use of biocides, fungicides and phytopharmaceuticals, not otherwise specified in items 42 to 44 of "Schedule 5—Waste Classification" of the Environment Protection Regulations 2021CodeH110DescriptionOrganophosphorus pesticidesCodeH170DescriptionWaste from manufacture, formulation and use of wood-preserving chemicalsCodeJ100DescriptionWaste oils, hydrocarbons, emulsions and transformer fluids excluding polychlorinated biphenylsCodeJ120DescriptionWaste oil/water, hydrocarbons/water mixtures or emulsionsCodeJ130DescriptionTriple interceptor waste and stormwater contaminated with oil or hydrocarbonCodeJ160DescriptionWaste tarry residues arising from refining, distillation, and any pyrolytic treatmentCodeJ170DescriptionUsed oil filtersCodeK100DescriptionAnimal effluent and residues, including abattoir wastes and other wastes from animal processingCodeK110DescriptionGrease trap wasteCodeK140DescriptionTannery wastes (not containing chromium)CodeK190DescriptionWool scouring wastesCodeL100DescriptionCar and truck washwatersCodeL200-HDescriptionIndustrial wastewater (excluding sewage) not otherwise specified in "Schedule 5—Waste Classification" of the Environment Protection Regulations 2021CodeM100DescriptionSolvents, oils and materials contaminated with polychlorinated biphenyls at a concentration of 50 mg per kg or greaterCodeM120DescriptionSolvents, oils and materials contaminated with polychlorinated biphenyls at a concentration greater than 2 mg per kg and up to 50 mg per kgCodeM130DescriptionNon-halogenated, non-solvent organic chemicals, not otherwise specified in "Schedule 5—Waste Classification" of the Environment Protection Regulations 2021CodeM150DescriptionPhenols, phenol compounds including chlorophenolsCodeM160DescriptionOrgano halogen compounds—other than substances referred to in "Schedule 5—Waste Classification" of the Environment Protection Regulations 2021CodeM220DescriptionIsocyanate compoundsCodeM230DescriptionAmines and other nitrogen compoundsCodeM250DescriptionSurface active agents (surfactants), containing principally organic constituents and which may contain metals and inorganic materialsCodeM260DescriptionHighly odorous organic chemicals (including mercaptans and acrylates)CodeN140DescriptionFire debris and fire wash-waters excluding anything covered under item 79 of "Schedule 5—Waste Classification" of the Environment Protection Regulations 2021CodeN210DescriptionResidue from pollution control operations, including baghouse dust and activated carbonCodeN220DescriptionWaste asbestosCodeR140DescriptionWaste from the production of pharmaceutical products and cosmetics, not otherwise specified in items 96, 97 or 98 of "Schedule 5—Waste Classification" of the Environment Protection Regulations 2021CodeT120DescriptionWaste from the production, formulation and use of photographic chemicals and processing materials not otherwise specified in items 100 or 102 to 112 of "Schedule 5—Waste Classification" of the Environment Protection Regulations 2021CodeT130-HDescriptionSludges or slurries, including drilling muds containing hazardous substancesIn the event of a discrepancy between the conditions listed on this page and the linked statutory document, the statutory document prevails.
No performance statements.